Recent questions tagged unit5

Nylon threads are made of

asked Mar 7, 2014 by thanvigandhi_1

1 answer

Perlon is ?

asked Mar 7, 2014 by thanvigandhi_1

1 answer

Polymer which is used for the formation of baby toys is

asked Mar 6, 2014 by thanvigandhi_1

1 answer

$F_2C=CF_2$ is a monomer of

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which is used for the formation of Nylon-66?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Nylon-6 is made from

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Polymer used in bullet proof glass is

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which of the following is a natural fibre?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which of the following is a copolymer?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Bakelite is obtained from phenol by reacting with

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Synthetic polymer prepared by using ethylene glycol and terephthalic acid is known as

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Natural rubber is a polymer of

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Thiokol is ?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Caprolactum is the starting material for

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which of the following polymers has the strongest interparticle forces?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which of the following is a homopolymer?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which of the following polymer is a copolymer?

asked Mar 6, 2014 by thanvigandhi_1

1 answer

The monomer of PVC is

asked Mar 6, 2014 by thanvigandhi_1

1 answer

Which of the following is not a condensation polymer?

asked Mar 6, 2014 by thanvigandhi_1

2 answers

Nylon -66 is a polyamide of a

asked Mar 6, 2014 by thanvigandhi_1

1 answer

The inter particle forces between linear chains in Nylon-66 are

asked Mar 6, 2014 by thanvigandhi_1

1 answer

The ratio between the root mean square speed of $H_2$ at 50K and that of $O_2$ at 800K is..

asked Mar 6, 2014 by sharmaaparna1

1 answer

The ratio of average speed of an oxygen molecule to the RMS speed of a nitrogen molecule at the same temperature is :

asked Mar 6, 2014 by sharmaaparna1

1 answer

The average kinetic energy of an ideal gas per molecule in SI units at $25^{\large\circ}C$ will be

asked Mar 6, 2014 by sharmaaparna1

1 answer

The ratio of rates of diffusion of propane and nitrogen (I) oxide at same P and T is

asked Mar 6, 2014 by sharmaaparna1

1 answer

A cylinder was filled with gaseous mixture containing $CO$ and $N_2$ . The ratio of their partial pressure in cylinder are:

asked Mar 6, 2014 by sharmaaparna1

1 answer

Oxygen and cyclopentane at partial pressure of 570 torr and 170 torr respectively are mixed in a gas cylinder . The ratio of the number of moles of cyclopentane to the number of moles of oxygen is:

asked Mar 6, 2014 by sharmaaparna1

1 answer

The repeating units in PTFE are

asked Mar 5, 2014 by thanvigandhi_1

1 answer

The S In BuNa –S refers to

asked Mar 5, 2014 by thanvigandhi_1

1 answer

BuNa - S is which of the following?

asked Mar 5, 2014 by thanvigandhi_1

1 answer

Bakelite is ?

asked Mar 5, 2014 by thanvigandhi_1

1 answer

Polymers are

asked Mar 5, 2014 by thanvigandhi_1

1 answer

The volume occupied by 1 mole of gas at 1 bar pressure and 273.15K is.....

asked Mar 5, 2014 by sharmaaparna1

1 answer

A 2.24 litre cylinder containing $O_2$ gas at $27^{\large\circ}C$ and 2 atm is found to develop a leakage was repaired , the pressure dropped to 100cm of Hg at $27^{\large\circ}C$ . The number of moles of gas escaped out during leakage is :

asked Mar 5, 2014 by sharmaaparna1

1 answer

A flask containing 12g of a gas of relative molecular mass 120 at a pressure of 100 atm , was evacuated by means of a pump untill the pressure was 0.01 atm at the same T. Which of the following is the best estimate of the number of molecules left in the flask. $(N_0 = 6\times10^{23} mol^{-1}$)

asked Mar 5, 2014 by sharmaaparna1

1 answer

If $V_0$ is the volume of the given mass of a gas at 273K and pressure P , then according to Charles's law the volume of same mass of gas at $10^{\large\circ}C$ and pressure P will be

asked Mar 5, 2014 by sharmaaparna1

1 answer

A quantity of hydrogen gas occupies a volume of 30.0mL at a certain temperature and pressure. What volume of half of this mass of hydrogen occupy at triple the absolute temperature if the pressure were one-ninth the original gas?

asked Mar 5, 2014 by sharmaaparna1

1 answer

Two separate bulbs contain gas A and gas B. The density of gas A is twice as that of B. The molecular mass of A is $\large\frac{1}{2}$ as that of B. If temperature is constant, the ratio of the pressure of A and B is :

asked Mar 5, 2014 by sharmaaparna1

1 answer

4.0g of argon has pressure P at temperature T K in a vessel . On keeping the sample at $50^{\large\circ}C$ higher temperature 0.8g gas was given out to maintain the pressure P. The original temperature was:

asked Mar 5, 2014 by sharmaaparna1

1 answer

The value of universal gas constant R depends on..

asked Mar 5, 2014 by sharmaaparna1

1 answer

One mole of an ideal monoatomic gas is mixed with 1 mole of an ideal diatomic gas. The molar specific heat of the mixture at constant volume is.

asked Mar 5, 2014 by sharmaaparna1

1 answer

If one mole of a monoatomic gas ($\gamma = \large\frac{5}{3}$) is mixed with one mole of a diatomic gas ($\gamma = \large\frac{7}{5}$) . The value of V for the mixture is :

asked Mar 5, 2014 by sharmaaparna1

1 answer

The joule - Thomson coefficient for a gas is zero at

asked Mar 3, 2014 by sharmaaparna1

1 answer

What is the pressure of 2 mole of ammonia at $27^{\large\circ}C$ when its volume is 5 litre according to Van der Waal's equation? (a = 4.17 b = 0.03711)

asked Mar 3, 2014 by sharmaaparna1

1 answer

A gas obeys the equation of state P(V-b) = RT (The parameter b is a constant). The slope for an isochore will be

asked Mar 3, 2014 by sharmaaparna1

1 answer

At high temperature and low pressure , the Van der Waal's equation is reduced to

asked Mar 3, 2014 by sharmaaparna1

1 answer

At low pressure , the Van der Waal's equation is written as

asked Mar 3, 2014 by sharmaaparna1

1 answer

Under critical conditions , the compressibility factor for a gas is

asked Mar 3, 2014 by sharmaaparna1

1 answer

If $U_{rms} is\; 30 R^{\large\frac{1}{2}}\; at \;27^{\large\circ}$ then the molar mass of the gas in kg is

asked Mar 3, 2014 by sharmaaparna1

1 answer

If the absolute temperature of a sample in a fixed volume container is quadrupled then the root mean square speed in the initial state $u_i$ and that in the final stage $u_f$ would be related as:

asked Mar 2, 2014 by sharmaaparna1

1 answer

Ask Questions, Get Answers