Recent questions tagged class11

A small spherical ball is released from a point at a height h on a rough track. Assuming that it does not slip any where , find its linear speed when it rolls on the horizontal part of the track.

asked Nov 29, 2013 by meena.p

1 answer

A small object density rolls up a curved surface with an initial velocity V. It reaches up to a maximum height of $ \large\frac{3V^2}{4g}$ with respect to the initial position. The object is

asked Nov 29, 2013 by meena.p

1 answer

A uniform circular disc of radius r is placed on a rough horizontal surface and given a linear $w_0$ as shown. The disc com,es to rest after moving some distance to the right. It follows that

asked Nov 29, 2013 by meena.p

2 answers

A solid sphere is placed rotating with its center initially at rest in a corner as shown. (a) and (b) . Coefficient of friction between all surfaces and sphere is $\large\frac{1}{3}$ Find the ratio of friction forces $\large\frac{fa}{fb}$ by ground in situations (a) and (b)

asked Nov 29, 2013 by meena.p

1 answer

A solid sphere of mass m is lying at rest on a rough horizontal surface. The coefficient of friction between the ground and sphere is $\mu$. The maximum value of F, so that the sphere will not slip is equal to

asked Nov 29, 2013 by meena.p

2 answers

A ring, cylinder and solid sphere are placed on the top of a rough incline on which the sphere can just roll with out slipping. When all of them are released at the same instant from the same position, then

asked Nov 29, 2013 by meena.p

1 answer

A hollow smooth uniform sphere A of mass 'm' roll without sliding on a smooth horizontal surface. It collides elastically and head on with another stationary solid sphere B of the same mass m and same radius. The ratio of kinetic energy of 'B' to that of 'A' just after the collision is

asked Nov 29, 2013 by meena.p

1 answer

As shown in the figure , auniform disc of mass m is rolling without slipping with an angular velocity w. The portion AB is rough and BC is smooth. When it crosses the point B disc will be in

asked Nov 29, 2013 by meena.p

1 answer

A body of mass m and radius r is rotated with angular velocity w as shown. and then kept on a surface that has sufficient friction. then the body will move

asked Nov 29, 2013 by meena.p

1 answer

A uniform disc is performing pure rolling on a smooth stationary surface with constant angular velocity. At any instant, for the lower most point of the disc

asked Nov 29, 2013 by meena.p

1 answer

An object of mass M and Radius R is performing pure rolling. motion on smooth horizontal surface under the action of a constant force F. The object may be

asked Nov 29, 2013 by meena.p

1 answer

If a spherical ball rolls with out slipping, the fraction of its total energy associated with rotation is

asked Nov 29, 2013 by meena.p

1 answer

A yo-yo placed on a rough horizontal surface and a constant force F, less than its weight , pulls it vertically . Due to this

asked Nov 29, 2013 by meena.p

1 answer

A disc of radius R rolls on a horizontal ground with linear acceleration $'a'$ and angular acceleration $' \alpha '$ as shown. The magnitude of the acceleration $'\alpha'$ of point P at an instant , when its linear velocity is V and angular velocity is $w$ will be,

asked Nov 29, 2013 by meena.p

1 answer

Which of the following statement(s) is /are correct for a spherical body rolling with out slipping on a rough horizontal ground at rest.

asked Nov 29, 2013 by meena.p

1 answer

A disc is pulled by a force F acting at a point above the centre of mass of the disc. The direction of frictional force f acting on the disc pushed on a rough surface will be represented by

asked Nov 29, 2013 by meena.p

1 answer

A disc can roll without slipping , with out applying any external force on a 1) rough inclined plane 2) smooth inclined plane 3) rough horizontal surface 4) smooth horizontal surface

asked Nov 29, 2013 by meena.p

1 answer

A thin string is wrapped several times around a cylinder kept on a rough horizontal surface. A boy standing at a distance l from the cylinder draws the string towards him as shown. The cylinder rolls without slipping . The length of the string passed through the hand of the boy while the cylinder reaches his hand is

asked Nov 29, 2013 by meena.p

1 answer

Consider a disc rolling with out slipping on a horizontal surface at a speed V as shown in figure. 1) the speed of the particle at A is 2V. 2) the speed of the particle and B,C and D is equal to V 3) The speed of C is zero and the speed of B is $\sqrt 2$ V 4) the speed of 0 is less then the speed of V which is the correct answer?

asked Nov 29, 2013 by meena.p

1 answer

In a GP, given that the first term is $ 312 ½ $ and the common ratio is $ 1/2 $ find the sum of the terms of the series to infinity.

asked Nov 28, 2013 by harini.tutor

1 answer

Angular momentum of the particle rotating with a central force is constant due to

asked Nov 28, 2013 by meena.p

1 answer

A conical pendulum consists of a simple pendulum moving in a horizontal circle as shown. $C$ is the pivot. $0$ is the centre of the circle in which the pendulum bob moves and w the constant angular velocity of the bob. If $\overrightarrow {L} $ is the angular momentum about the axis $C_0$, then

asked Nov 28, 2013 by meena.p

1 answer

A conical pendulum consists of a simple pendulum moving in a horizontal circle as shown. C is the pivot. O is the centre of the circle in which the pendulum bob moves and w the constant angular velocity of the bob. If $\overrightarrow {L} $ is the angular momentum about C, then

asked Nov 28, 2013 by meena.p

1 answer

If the resultant of all external forces acting on a system of particles is zero, then from an inertial frame, one can surely say that

asked Nov 28, 2013 by meena.p

1 answer

A kid of mass M stands at the edge of a platform of radius r which can freely rotate about its axis. The moment of inertia of platform is I. The system is at rest when a friend throws a ball of mass m and the kid catches it. If the velocity of the ball is v horizontally along the tangent to the edge of the platform when it was caught by the kid, find the angular speed of the platform after the event.

asked Nov 28, 2013 by meena.p

1 answer

In the given figure , a ball strikes a rod elastically and the rod is hinged at point A. Then which of the statements is / are correct ?

asked Nov 28, 2013 by meena.p

1 answer

In the absence of external force acting n a rigid system, which of the following must remain constant 1) angular momentum 2) linear momentum 3) moment of inertia 4) kinetic energy Which one is the correct answer ?

asked Nov 28, 2013 by meena.p

1 answer

A boy sitting over a rotating stool has his arms folded. If he stretches his arms, his angular momentum about the axis of rotation

asked Nov 28, 2013 by meena.p

1 answer

A uniform thin circular ring of mass M and radius R is rotating about its fixed axis passing through its centre, perpendicular to its plane of rotation with constant angular velocity w. Two objects each of mass m are gently attached to the opposite ends of the diameter of the ring. The ring now rotates with an angular velocity

asked Nov 28, 2013 by meena.p

1 answer

There are how many Boron atoms in metaborate ion?

asked Nov 28, 2013 by sreemathi.v

1 answer

A particle performs uniform circular motion with angular momentum L. If the frequency of particles motion is doubled and its kinetic energy is halved, the angular momentum becomes

asked Nov 28, 2013 by meena.p

0 answers

A conical pendulum consists of a simple pendulum moving in a horizontal circle as shown. C is the pivot . O is the circle in which the pendulum moves.and $w_1$ the angular velocity of the bob. If L is the angular momentum about C, then

asked Nov 28, 2013 by meena.p

1 answer

The angular momentum of a particle about $o$ is varying as $L = 4t+8$ (SI units) . When it moves along straight line $y= x-4$(x,y in maters) . The magnitude of force acting on the particle would be

asked Nov 28, 2013 by meena.p

1 answer

A disc of mass M and radius R is rolling with angular speed w on a horizontal plane as shown. The magnitude of the angular momentum of the disc about the origin O is :

asked Nov 28, 2013 by meena.p

1 answer

Angular momentum of a particle rotating with a centre force is constant due to

asked Nov 28, 2013 by meena.p

1 answer

A particle is projected at time $t=0$ from a point P on the ground with a speed $V_0$ at an angle of $45^{\circ}$ to the horizontal . What is the magnitude of the angular momentum of the particle about point P at time $t= \large\frac{V_0}{g}$

asked Nov 28, 2013 by meena.p

1 answer

A particle is projected at time $t=0$ from a point P on the ground with speed u at an angle $\theta$ with the horizontal. The angular momentum of the particle about the origin when it is at the maximum height

asked Nov 28, 2013 by meena.p

1 answer

A particle of mass 2 kg is moving along a straight line $3x+4y=5$ with speed $8 m/s$. What is the angular momentum of the particle about the orgin.

asked Nov 28, 2013 by meena.p

1 answer

A particle of mass 2 kg is moving with velocity $2 \hat i + 3\hat j $. Its angular momentum about the origin when the particle is at $(1,1,0)$

asked Nov 28, 2013 by meena.p

1 answer

A particle of mass m starts from origin with constant velocity $u \hat i$. What will be the angular momentum of the speed increases in the above case?

asked Nov 28, 2013 by meena.p

1 answer

A particle of mass m starts from origin with constant velocity $u \hat i$. What will be the angular momentum at a later instant.

asked Nov 28, 2013 by meena.p

1 answer

A particle of mass m starts from origin with constant velocity $u \hat i$. Its angular momentum about the origin is

asked Nov 28, 2013 by meena.p

1 answer

Two persons of equal height are carrying a long wooden beam of length l. They are at a distance $\frac{l}{4}$ and $\frac{l}{6}$ from the nearest end of the rod. The ratio of the normal reactions at their heads i s

asked Nov 27, 2013 by meena.p

1 answer

A uniform rod of mass m and length L is suspended with two massless strings as shown. If the rod is at rest in a horizontal position, the ratio of the tensions in the two strings?

asked Nov 27, 2013 by meena.p

1 answer

A uniform rod of length 5 m is placed against the wall as shown. If coefficient of friction $\mu$ is the same for both the walls, the minimum value for $\mu$ not to slip.

asked Nov 27, 2013 by meena.p

1 answer

Four equal and parallel forces are acting on a rod at distances of 20 cm, 40 cm, and80cm respectively , from one end of rod. Under the influence of these forces, the rod is

asked Nov 27, 2013 by meena.p

1 answer

A light rod of length 1 m is pivoted at its centre and two masses 5 kg and 2 kg are hung from the ends as shown. In the above question if the rod has a mass 1 kg, then its initial angular acceleration

asked Nov 27, 2013 by meena.p

1 answer

A light rod of length 1 m is pivoted at its centre and two masses 5 kg and 2 kg are hung from the ends as shown. The critical angular acceleration of the rod if it is assumed to be massless is?

asked Nov 27, 2013 by meena.p

1 answer

A uniform rod of length l is free to rotate in a vertical plane about a fixed horizontal axis through 0. The rod is allowed to rotate from its unstable vertical position. Then the angular velocity of the rod when it has turned through an angle $\theta$ is

asked Nov 27, 2013 by meena.p

1 answer

Acceleration of block $m_1$ is (given moment of inertia of pulley is I and string does not slip over the pulley )

asked Nov 27, 2013 by meena.p

1 answer

Ask Questions, Get Answers